
OVA-50 Optical Variable Attenuator can precisely attenuate input optical signals at 1310/1490/1550/1625nm wavelengths and directly output defined stabilized optical signal. OVA-50 is applicable in various testing situations:
· Network/BER testing
· Power meter calibration
· Link loss simulation
· Optical margin analysis
Direct Output Power Control
Normal attenuator can only introduce and display an attenuation value, you need a separate power meter to measure or adjust the output power value of attenuated optical signal. Working like a combination of attenuator and power meter, OVA-50 Output Power Control mode enables direct setting of precise optical power level and can automatically stabilize output level without any interference by the variations of input power.
Program Mode
User can preprogram frequently-used attenuations to reduce workload.
Specification
Model
|
OVA-50
|
Wavelength Range
|
1260~1650nm
|
Calibrated Wavelengths
|
1310/1490/1550/1625nm
|
Fiber Type
|
9/125μm Singlemode
|
Attenuation Range
|
2.5 - 60dB
|
Insertion Loss
|
<2.5dB
|
Max Input Power
|
+21dBm
|
Output Power Range (1)
|
+18 ~ -55 dBm
|
Setting Time
|
<3s
|
Display Resolution
|
0.01dB
|
Attenuation Accuracy
|
±0.25dB@+25℃ ( Output power control mode)
|
Repeatability
|
±0.25dB@+25℃
|
Return Loss
|
≥55dB
|
Connector
|
FC/PC (Interchangeable SC,ST)
|
Power Saving
|
Auto-off after 5 minutes idle
|
Backlight
|
Yes
|
Power Supply
|
Li-Ion Battery/AC Adaptor
|
Battery Life
|
Continuous operation >30hours
|
Weight
|
345g (0.7 lbs)
|
Dimensions (H × W × T)
|
177×80×44mm (6.97×3.15×1.73 inch)
|
Note: (1) Input power level should to be at least 3 dB higher than selected output power level;
Input power variations in frequency range <0.5 Hz
* Specifications subject to change without notice
Katalógus letöltés (pdf)
|