BELÉPÉS
Termékek
Akkumulátor mérők
Alkatrészmérők
Áramváltók (Nagy pontosságú)
Automatikus tesztelő rendszerek
Dekádok
Elektronikus terhelések
Életvédelmi műszerek
Feszültség teszter
Frekvenciamérők
Generátorok
Hőmérsékletmérők
Kalibrátorok
Lakatfogók
Mérésadatgyűjtők
Multiméterek
Oktatási eszközök
Optikai mérőeszközök
Optikai szerelések
Oszcilloszkópok
Regisztrálók
Spektrum analizátor
Solar system
Szigetelés vizsgálók
Tápegységek
Teljesítménymérők, analizátorok
OPTICAL SPECTRUM ANALYZER, TYPE: AQ-6375B
AQ-6375B

 

 

High Performance LONG WAVELENGTH
The AQ-6375B is the first bench-top optical spectrum analyzer covering the long wavelengths over 2 μm.
It is designed for researchers and engineers who have been struggling with inadequate test equipment to measure in these long wavelength ranges. The AQ-6375B achieves high speed measurements with high accuracy, resolution and sensitivity, even while providing full analysis features. Troublesome calibration steps and the development of external analysis software is no longer required.
 
The features of this AQ-6375B are indispensable to the research, development, and manufacturing of optical devices in the wavelength range from telecom band to 2.4 um. No other test system can achieve this high performance and ease of use at the same time.

Long Wavelength 1200 nm to 2400 nm

The AQ-6375B covers not only telecommunication wavelengths, but also the long wavelength region which is used for environmental sensing, medical, and industrial material applications.
High Sensitivity +20 dBm to -70 dBm

The AQ-6375B can measure optical power as low as -70 dBm, which enables measurements of low power sources or low power output of a device under test. Measurement sensitivity can be chosen from seven categories according to test applications and measurement speed requirements.

HighResolution & WideDynamicRange

The AQ-6375B uses a double-pass monochromator structure to achieve high wavelength resolution (0.05 nm) and wide close-in dynamic range (55 dB). Thus, closely allocated signals and noise can be separately measured.

High speed Measurement

High Speed Sweep

With a proprietary sweep technique the AQ-6375B achieves a much faster sweep speed than conventional measurement systems which use a monochromator. Max. sweep time is only 0.5 sec. in 100 nm span.
 
Fast Command Processing and Data Transfer
Applying a fast microprocessor, the AQ-6375B achieves very fast command processing speed and Ethernet provides up to 100 times faster data transfer speed than the GP-IB.
 
Free-Space Optical Input
SUPPORT MULTIMODE FIBRE
Applicable fibre: SMF and MMF
The AQ-6375B uses a free space input structure, not having an optical fibre inside the monochromator that can handle both single mode and multimode fibres. The free space input is also beneficial for measurement repeatability.
 
Built-in Calibrator
EASY CALIBRATION
The AQ-6375B comes with a built-in calibrator for wavelength calibration and optical alignment adjustment of the monochromator in order to maintain accurate measurements. The calibration and adjustment are automatically performed and completed within a couple of minutes.
Wavelength Calibration
Calibrates with the designate absorption line of Acetylene gas.
Optical Alignment Adjustment
Corrects mechanical movements inside the monochromator caused by shock and vibration.

Building Automated Test Systems

REMOTE OPERATION
The AQ-6375B is equipped with GP-IB, RS-232, and Ethernet (10/100Base-T) interfaces to be connected with an external PC for remote access and building an automated test system. Macro Program is a useful built-in function for making a simple auto test program.
 
COMPATIBLE WITH SCPI
The standard remote commands of the AQ-6375B are compatible with SCPI, which is an ASCII text based standard code and format that conforms to IEEE- 488.2.
 
AQ-6317 EMULATION MODE
The AQ-6375B supports private remote programming codes of Yokogawa's best selling AQ-6317 series for users to easily upgrade from their current automated test environment. (Note. some commands may not be compatible due to changes in specifications and functions.)
 
MACRO PROGRAMMING
Macro programming enables user to easily create test procedures by recording the user's actual key strokes and parameter selections. An external PC is not required because the macro program can also control external equipment through the remote interfaces.

  Katalógus letöltés (pdf)              Használati útmutató (pdf)

  Getting started (pdf)                  Remote control manual (pdf)

Vissza